Сайт использует cookie и счётчики посещений для работы и статистики. Политика конфиденциальности
Найдено: 60+
Overview ISO 5361:2023/Amd 1:2026 is a critical amendment to the international standard for anaesthetic and respiratory equipment, specifically focusing on tracheal tubes and connectors. Published by…
1 Scope This document refers to ISO 52003‑1. It contains information to support the correct understanding and use of ISO 52003‑1 and does not contain any normative provisions. NOTE The relation with…
PD ISO/TR 9464 is a technical report to help oil and gas sector measure flowrate in pipelines. PD ISO/TR 9464 answers some of important questions which might arise as a result of the application BS E…
1 Scope This document gives guidance on the use of an energy management system (EnMS) in accordance with ISO 50001:2018 to achieve net zero energy ( NZE ), and supports the achievement of net zero ca…
What is PD CEN ISO/TR 52127-2 about? PD CEN ISO/TR 52127-2 is the second part of multiple series that contains information to support the correct understanding, use and adoption of ISO 52127-1. PD CE…
1 Scope This document refers to the overarching EPB-standard, ISO 52000‑1 [1] . It contains information to support the correct understanding, use and national implementation of ISO 52000‑1. This incl…
1 Scope This Technical Report provides guidance on estimating the flowrate when using pressure differential devices constructed or operated outside the scope of ISO 5167. Additional tolerances or cor…
1 Scope This document describes the geometry and method of use for conical-entrance orifice plates, quarter-circle orifice plates, eccentric orifice plates and Venturi tubes with 10,5° convergent ang…
1 Scope This document contains information to support the correct understanding, use and adoption of ISO 52120‑1.
1 Scope This document contains information to support the correct understanding and use of ISO 52016-1 and ISO 52017-1. These documents give calculation methods for the assessment of: — the (sensible…
Overview ISO/TR 9464:2023 - Guidelines for the use of ISO 5167:2022 - is a Technical Report that helps users correctly apply the ISO 5167 series for flow measurement in circular conduits using differ…
Overview ISO/TR 52016-2:2017 is an informative ISO Technical Report that explains and justifies the calculation approaches given in ISO 52016‑1 and ISO 52017‑1 for the energy performance of buildings…
Overview ISO/TR 12942:2012 - "Compressors - Classification - Complementary information to ISO 5390" is an informative Technical Report from ISO/TC 118 that provides a structured, multi‑dimensional cl…
Overview ISO 59014:2024 - Environmental management and circular economy - Sustainability and traceability of the recovery of secondary materials provides principles, requirements and guidance for org…
Overview ISO 56005:2020 - Innovation management - Tools and methods for intellectual property management - Guidance - provides practical guidance to integrate intellectual property (IP) into innovati…
Overview ISO/TR 6409:2023 is a technical report from ISO that analyses the technical changes introduced in ISO 5011:2020 (Inlet air cleaning equipment for internal combustion engines and compressors)…
Overview ISO 56003:2019 - Innovation management - Tools and methods for innovation partnership - Guidance - provides structured guidance for establishing, selecting, aligning and governing innovation…
Overview ISO 50049:2020 - Calculation methods for energy efficiency and energy consumption variations at country, region and city levels - provides standardized, indicator-based methods to analyse ch…
Overview ISO 50002-2:2025 - "Energy audits - Part 2: Guidance for conducting an energy audit using ISO 50002-1 in buildings" provides targeted guidance on applying ISO 50002-1 specifically to audits…
Overview ISO 580:2005 is an international standard published by the International Organization for Standardization (ISO) that defines methods for visually assessing the effects of heating on injectio…
Overview ISO 5156:2022 - "Corrosion of metals and alloys - Corrosion test method for disinfectant - Total immersion method" specifies a standardized laboratory method to determine the corrosivity of…
Overview ISO 5609-5:2012 specifies the characteristics of tool holders for internal turning with cylindrical shank - Style U. It covers tool holders with a reduced (stepped) cylindrical shank and a c…
Overview ISO 5630-4:1986 sets the international standard for accelerated ageing of paper and board using dry heat treatment at elevated temperatures of 120°C or 150°C. This standard is primarily desi…
Overview - ISO 5734:1986 (Acceptance conditions of mechanical dividing heads for machine tools - Testing of accuracy) ISO 5734:1986 specifies the geometrical tests and permissible deviations for gene…
Overview ISO 5053-1:2020 - Industrial trucks - Vocabulary - Part 1: Types of industrial trucks - is an international standard developed by ISO Technical Committee ISO/TC 110 that establishes standard…
Overview ISO 50002-3:2025 - Energy audits - Part 3 provides practical guidance for conducting energy audits of industrial and commercial processes using ISO 50002-1. It is a supplementary document in…
Overview ISO 55012:2024 - Asset management - Guidance on people involvement and competence provides practical guidance to enhance people involvement, commitment and competence within an asset managem…
Overview ISO 5275:2003 specifies the qualitative "Doctor test" procedure for the detection of thiols (mercaptans), hydrogen sulfide (H2S) and elemental sulfur in hydrocarbon solvents and distillate p…
Overview ISO 50003:2021 specifies requirements for bodies that audit and certify energy management systems (EnMS) against ISO 50001. Intended to be used alongside ISO/IEC 17021-1:2015, it focuses on…
Overview ISO 5724:2023 - "Jewellery and precious metals - Determination of very high purity gold - Difference method using ICP‑MS" defines an analytical procedure for measuring very high purity gold…
Overview ISO 5001:2012 specifies requirements for cold-reduced carbon steel sheet for vitreous enamelling. It covers commercial and drawing qualities where surface condition and chemical composition…
Overview ISO 5681:2020 establishes a standardized vocabulary for equipment used to apply plant protection products (PPPs). The document defines terms commonly used in relation to application equipmen…
Overview ISO 52017-1:2017 sets forth generic procedures for calculating the energy performance of buildings, with a focus on the transient (hourly or subhourly) assessment of internal air and operati…
Overview - ISO 5146:2023 (Density tracer testing for coal density separators) ISO 5146:2023 specifies a standardized, site-based method for measuring the performance of coal density separators using…
Overview ISO 54321:2020 defines standardized procedures for the aqua regia digestion of solid environmental matrices - soil, treated biowaste, sludge and waste - to extract the aqua regia soluble fra…
Overview ISO 5076:2024 - Traditional Chinese medicine - Angelica dahurica root defines quality and safety requirements for Angelica dahurica root (dried root of Angelica dahurica) used as natural med…
Overview ISO 5370:2023 - Solid biofuels - Determination of fines content in pellets specifies a manual sieving method to quantify fines in wood and other solid biofuel pellets. The standard defines f…
Overview ISO 5209:2019 - General purpose industrial valves - Marking - sets out mandatory and optional marking requirements for metal industrial valves (plastic valves are excluded). The standard def…
Overview ISO 5411:2024 - Ships and marine technology - Submersibles - Vocabulary establishes a common set of terms and definitions for submersibles. Rather than prescribing design or construction rul…
Overview ISO 5978:2023 specifies a laboratory method to determine the blocking resistance of rubber- or plastics-coated fabric sheets when left in contact under defined temperature, time and pressure…
Overview ISO 5682-4:2021 specifies standardized test methods for agitation performance in sprayer tanks used to apply plant protection products and fertilizers. It defines how to prepare test suspens…
Overview ISO 5059-1:2025 - Geometrical product specifications (GPS) - Part 1 specifies the principal design and metrological characteristics of two-point inside micrometers. The standard applies to a…
Overview ISO 5263-2:2004 - "Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 °C" specifies equipment and procedures for reproducible wet disintegration of mech…
Overview ISO 5211:2026 – Industrial valves - Part-turn actuator attachments specifies the standardized interface between part-turn actuators (with or without gearboxes) and industrial valves. This in…
Overview - ISO 5540:2023 - Dual traction/stowage winches for oceanographic research ISO 5540:2023 specifies requirements for the design, construction, safety, performance and acceptance testing of du…
Overview ISO 5390:1977 is an international standard developed by the International Organization for Standardization (ISO) that provides a comprehensive classification of compressors. This standard co…
Overview ISO 5637:1989 is an international standard established by the International Organization for Standardization (ISO) that specifies a method for determining the water absorption of paper and b…
