IEC 62442-1:2018 PDF

Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear

Первая страница стандарта IEC 62442-1:2018

Открыть превью (PDF)

Название (английский):

IEC 62442-1:2018

Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 62
Дата публикации:: 3 мая 2018 г.
Издание:: IEC IS 62442 edition 2 version 1
ICS:: 29.140.99

Язык документа:

ruen

Срок поставки:11 раб. дн. (перевод)

Цена:930 €

Описание (английский):

IEC 62442-1:2018 defines a measurement and calculation method of the total input power for controlgear-lamp circuits when operating with their associated fluorescent lamp(s). The calculation method for the efficiency of the lamp controlgear is also defined. This document applies to electrical controlgear-lamp circuits consisting only of the controlgear and the lamp(s). It is intended for use on DC supplies up to 1 000 V and/or AC supplies up to 1 000 V at 50 Hz or 60 Hz. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision and has been harmonized with IEC 62442-2 and IEC 62442-3.

Технические детали

Технический комитет: SC 34C - Auxiliaries for lamps
SKU: IEC 62442-1:2018

Abstract

Overview

IEC 62442-1:2018 - Energy performance of lamp controlgear, Part 1 - defines standardized measurement and calculation methods to determine the total input power of controlgear‑lamp circuits and to calculate the efficiency of lamp controlgear for fluorescent lamps. This second edition (2018) replaces the 2011 edition and is harmonized with IEC 62442-2 and IEC 62442-3. The standard applies to controlgear‑lamp circuits (controlgear + lamp(s) only) supplied by DC or AC up to 1 000 V at 50 Hz or 60 Hz and covers linear, compact (single‑ended) and other general‑purpose fluorescent lamps.

Key topics and technical requirements

Scope and applicability: Measurement method applies only where the controlgear and lamp(s) are separate components (excludes controlgear integral to the lamp, controllable wire‑wound magnetic controlgear, and luminaires with additional optical requirements).
Total input power measurement: Defines how to measure the combined input power of the controlgear‑lamp circuit under specified test conditions.
Controlgear efficiency calculation: Provides a calculation method to derive controlgear efficiency from measured inputs and lamp operating conditions.
Types of controlgear covered: Both magnetic (wire‑wound electromagnetic) and electronic controlgear measurement procedures are specified.
Ancillary measurements: Procedures for measuring standby power, ballast lumen factor correction, light output measurement setup (Annex A), and guidance on lamp conditioning and sampling.
Test conditions: Requirements for sampling, conditioning of lamps, test voltages/frequencies (50 Hz/60 Hz), and sensor/network connections to ensure repeatable results.
Normative references: Cross‑referenced IEC standards for lamp and ballast performance (e.g., IEC 60081, IEC 60929, IEC 61347 series).

Practical applications and users

Who uses IEC 62442-1 and why:

Controlgear and ballast manufacturers - to validate energy performance, optimize designs, and support efficiency claims.
Test laboratories and certification bodies - to perform reproducible measurements for compliance, product certification, and reporting.
Lighting designers, specifiers and procurement teams - to compare controlgear efficiency and estimate system energy use in projects.
Regulators and energy program managers - to define conformity criteria, energy labeling, and efficiency incentive schemes.
R&D teams - for benchmarking electronic vs. magnetic controlgear and for evaluating standby losses and lumen factor impacts.

Practical benefits include reliable comparison of products, better energy budgeting for installations using fluorescent lighting, and harmonized test evidence for regulatory and market access purposes.

Related standards

IEC 62442-2 and IEC 62442-3 (harmonized parts of the series)
IEC 60081, IEC 60901, IEC 60921, IEC 60929, IEC 61347 (normative references cited by IEC 62442-1)

Keywords: IEC 62442-1, lamp controlgear, energy performance, fluorescent lamps, total input power, controlgear efficiency, ballast, measurement method, standby power, electrical testing.

Overview

Key topics and technical requirements

Scope and applicability: Measurement method applies only where the controlgear and lamp(s) are separate components (excludes controlgear integral to the lamp, controllable wire‑wound magnetic controlgear, and luminaires with additional optical requirements).
Total input power measurement: Defines how to measure the combined input power of the controlgear‑lamp circuit under specified test conditions.
Controlgear efficiency calculation: Provides a calculation method to derive controlgear efficiency from measured inputs and lamp operating conditions.
Types of controlgear covered: Both magnetic (wire‑wound electromagnetic) and electronic controlgear measurement procedures are specified.
Ancillary measurements: Procedures for measuring standby power, ballast lumen factor correction, light output measurement setup (Annex A), and guidance on lamp conditioning and sampling.
Test conditions: Requirements for sampling, conditioning of lamps, test voltages/frequencies (50 Hz/60 Hz), and sensor/network connections to ensure repeatable results.
Normative references: Cross‑referenced IEC standards for lamp and ballast performance (e.g., IEC 60081, IEC 60929, IEC 61347 series).

Practical applications and users

Who uses IEC 62442-1 and why:

Controlgear and ballast manufacturers - to validate energy performance, optimize designs, and support efficiency claims.
Test laboratories and certification bodies - to perform reproducible measurements for compliance, product certification, and reporting.
Lighting designers, specifiers and procurement teams - to compare controlgear efficiency and estimate system energy use in projects.
Regulators and energy program managers - to define conformity criteria, energy labeling, and efficiency incentive schemes.
R&D teams - for benchmarking electronic vs. magnetic controlgear and for evaluating standby losses and lumen factor impacts.

Related standards

IEC 62442-2 and IEC 62442-3 (harmonized parts of the series)
IEC 60081, IEC 60901, IEC 60921, IEC 60929, IEC 61347 (normative references cited by IEC 62442-1)

Keywords: IEC 62442-1, lamp controlgear, energy performance, fluorescent lamps, total input power, controlgear efficiency, ballast, measurement method, standby power, electrical testing.

IEC 62442-1:2018 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Похожие стандарты

Energy performance of lamp controlgear - Controlgear for discharge lamps (excluding low-pressure mercury fluo…

Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources…

Double-capped fluorescent lamps - Performance specifications

Lamp controlgear - Part 1: General and safety requirements

Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to…

Amendment 4 - Single-capped fluorescent lamps - Performance specifications