Overview
ISO 14629:2012 defines a standardized funnel test method to determine the flowability of ceramic powders used in fine/advanced ceramics. The method measures the time for a fixed mass of powder to pass through a specified funnel orifice and converts that time into a flow rate (grams per second). The procedure applies only to powders that flow freely through the chosen orifice.
Key topics and requirements
- Scope: Granulated or ungranulated ceramic powders that freely pass the funnel orifice.
- Sample size and replication: At least 200 g of sample; test portions of 50.0 g; three determinations and average result.
- Apparatus:
- Funnels with orifice diameters 2.5 mm and 5.0 mm (stainless steel, corrosion-resistant).
- Container to collect discharged powder; stand with vibration-free base and level meter.
- Sieve (ISO 565) with 0.71 mm aperture.
- Balance (0.1 g or 0.01 g resolution for very fluffy powders), stopwatch (0.1 s), and anti-static glove.
- Pre-treatment: Typically test as-received. If drying is required, dry at (110 ± 5) °C for ≥1 h and cool in a desiccator. Do not dry powders with volatile components. Any pre-treatment must be recorded.
- Test procedure: Sieve the powder, weigh 50.0 g, place in funnel, unblock orifice while timing flow until last powder exits. If flow fails or is intermittent, record observations.
- Calculation: Flowability is mass collected divided by elapsed time (expressed in g/s). Results rounded per ISO 80000-1.
- Reporting: Follow ISO/IEC 17025 reporting provisions and include environmental conditions, sample ID, pre-treatments, results (g/s), and any anomalies (e.g., blockage).
Applications and users
ISO 14629:2012 is used where reliable, repeatable characterization of powder flowability is critical:
- Quality control and incoming inspection at ceramic powder manufacturers and suppliers
- Process engineering for pressing, tape casting, injection molding, powder handling and dosing systems
- R&D and materials laboratories evaluating feedstock for sintering or additive manufacturing
- Independent testing laboratories performing standardized comparisons between batches or suppliers
Typical users include materials engineers, quality managers, laboratory technicians, and procurement specialists seeking objective flowability metrics.
Related standards
Standards referenced or related to ISO 14629 include:
- ISO 565 (test sieves)
- ISO/IEC 17025 (laboratory competence and reporting)
- ISO 4490, ASTM B213, and various JIS/KS methods for powder flow measurement and metallic powder flow testing
Keywords: ISO 14629:2012, flowability, ceramic powders, fine ceramics, funnel method, flow rate (g/s), powder testing, powder handling, quality control.
Открыть превью (PDF)Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of flowability of ceramic powders