ISO 20957-7:2020 PDF

Stationary training equipment — Part 7: Rowing equipment, additional specific safety requirements and test methods

Первая страница стандарта ISO 20957-7:2020

Открыть превью (PDF)

Название (английский):

ISO 20957-7:2020

Stationary training equipment — Part 7: Rowing equipment, additional specific safety requirements and test methods

Статус документа:: Отменён
Формат:: Электронный (PDF)
Количество страниц:: 9
Дата публикации:: 8 октября 2020 г.
Издание:: ISO IS 20957 edition 2 version 1
ICS:: 97.220.30

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:135 €

Описание (английский):

This document specifies safety requirements for rowing equipment. This document is intended to be read in conjunction with the general safety requirements of ISO 20957‑1. This document is applicable to rowing type stationary training equipment, hereinafter referred to as rowing equipment, within the classes H, S and I and classes A, B and C regarding accuracy.

Технические детали

Технический комитет: ISO/TC 83 - Sports and other recreational facilities and equipment
SKU: ISO 20957-7:2020

Abstract

Overview

ISO 20957-7:2020 is the International Organization for Standardization (ISO) safety standard for stationary rowing training equipment. It defines additional specific safety requirements and test methods for rowing-type stationary training machines and is intended to be read together with the general safety requirements in ISO 20957‑1. The standard applies to rowing equipment classes H, S, I and accuracy classes A, B, C.

Key topics and technical requirements

The standard covers design, performance and verification requirements with specified test methods. Major technical points include:

Temperature rise: Accessible surfaces must not exceed ≤ 65 °C (tested per Clause 6.3).
Seat security: Seat must not derail when a load of ≥ 100 N is applied in all directions (Clause 5.2.4 and 6.2).
Intrinsic loading: Equipment shall withstand 2.5 × the maximum user body mass ±5% specified by the manufacturer, or 2 500 N, whichever is greater (Clause 5.3, tested in 6.4).
Handles and motion: For flexible‑connected handles (rope, belt, chain) the handle mass without flexible member ≤ 600 g and handle travel > 1 600 mm measured from foot rest centre to handle centre (Clause 5.4).
Ropes/belts/chains: Attachment systems shall withstand a specified static load (see Clause 5.5 and 6.1.6 for the defined test procedure).
Foot straps and supports: Each foot strap must resist a pull of ≥ 500 N; each foot support must resist a push of ≥ 1 000 N (Clauses 5.6–5.7 and tests in 6.5–6.6).
Endurance: Fatigue testing of cycles - 12 000 cycles for class H and 100 000 cycles for classes S and I - under maximum user load and maximum resistance (Clause 5.8, test 6.7).
Stability: Equipment shall not tip over during stability testing (Clause 5.9, test 6.8).
Power display accuracy (Class A): For outputs ≥ 50 W tolerance ±10%; for

Overview

Key topics and technical requirements

The standard covers design, performance and verification requirements with specified test methods. Major technical points include:

Temperature rise: Accessible surfaces must not exceed ≤ 65 °C (tested per Clause 6.3).
Seat security: Seat must not derail when a load of ≥ 100 N is applied in all directions (Clause 5.2.4 and 6.2).
Intrinsic loading: Equipment shall withstand 2.5 × the maximum user body mass ±5% specified by the manufacturer, or 2 500 N, whichever is greater (Clause 5.3, tested in 6.4).
Handles and motion: For flexible‑connected handles (rope, belt, chain) the handle mass without flexible member ≤ 600 g and handle travel > 1 600 mm measured from foot rest centre to handle centre (Clause 5.4).
Ropes/belts/chains: Attachment systems shall withstand a specified static load (see Clause 5.5 and 6.1.6 for the defined test procedure).
Foot straps and supports: Each foot strap must resist a pull of ≥ 500 N; each foot support must resist a push of ≥ 1 000 N (Clauses 5.6–5.7 and tests in 6.5–6.6).
Endurance: Fatigue testing of cycles - 12 000 cycles for class H and 100 000 cycles for classes S and I - under maximum user load and maximum resistance (Clause 5.8, test 6.7).
Stability: Equipment shall not tip over during stability testing (Clause 5.9, test 6.8).
Power display accuracy (Class A): For outputs ≥ 50 W tolerance ±10%; for

ISO 20957-7:2020 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Stationary training equipment - Part 1: General safety requirements and test methods (ISO 20957-1:2024)

Systems and software engineering — Software life cycle processes

Asset management — Vocabulary, overview and principles

Asset management — Asset management system — Requirements

Information technology — Radio frequency identification device conformance test methods — Part 2: Test method…

Information technology — Multimedia framework (MPEG-21) — Part 22: User Description

Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method)

Carbonaceous materials for the production of aluminium — Cold and tepid ramming pastes — Expansion/shrinkage…