ISO 2283:2000 PDF

Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in — Reduced shank taps

Открыть превью (PDF)

Название (английский):

ISO 2283:2000

Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in — Reduced shank taps

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 23 марта 2000 г.
Издание:: ISO IS 2283 edition 2 version 1
ICS:: 25.100.50

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

La présente Norme internationale spécifie les dimensions des tarauds à queue dégagée de diamètre nominal M3 à M24 et 1/8 in à 1 in et complète ainsi l'ISO 8051 qui concerne les tarauds à queue pleine. Elle est applicable aux tarauds à machine à queue longue.Les spécifications techniques des tarauds faisant l'objet de la présente Norme internationale (comprenant le marquage) sont données dans l'ISO 8830. La présente Norme internationale est applicable aux tarauds destinés à l'exécution des filetages suivants:a) Filetages métriques ISO- à pas gros;- à pas fins.b) Filetages ISO en inches- série «Unified Coarse» (UNC) et série «Unified Fine» (UNF).Les filetages en inches non recommandés suivants:- «British Standard Whitworth» (BSW) et «British Standard Fine» (BSF);- «British Association» (BA)sont donnés dans l'annexe A.

Технические детали

Технический комитет: ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces
SKU: ISO 2283:2000

Abstract

Overview

ISO 2283:2000 - "Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps" - specifies dimensional requirements for long-shank, reduced-shank machine taps. This second-edition ISO standard (2000) complements ISO 8051 (full-diameter shank taps) and applies to taps used for cutting ISO metric threads (coarse and fine) and ISO inch threads (Unified UNC and UNF series). Informative Annex A lists several non‑recommended inch thread series (BSW, BSF, BA).

Key topics and technical requirements

Scope and applicability: Dimensions for reduced-shank long shank machine taps with nominal diameters M3–M24 and 1/8 in–1 in.
Thread types covered: ISO metric (coarse and fine) and ISO inch (UNC, UNF). Non-recommended threads (BSW/BSF/BA) are in Annex A for information only.
Dimensional data: Detailed dimensions provided in figures and tables (metric and inch tables) for nominal diameter, pitch, thread length, shank length (L − l), square size, and related tolerances.
Shank length modification: Shank lengths (L − l) are increased by 50% compared with values in ISO 529 for short taps; total tap lengths are adjusted accordingly.
Thread length: Thread lengths conform to ISO 529.
Marking and technical specifications: Marking requirements and other technical specifications are referenced to ISO 8830 (high-speed steel machine taps with ground threads).
Tolerances: Precision shank tolerance h9 (or h11 for non-precision) and guidance on tolerance enlargement (h12) for square-form errors per ISO 237.

Applications and users

Who uses ISO 2283:

Tool manufacturers producing long shank reduced-shank taps and manufacturers’ quality departments.
Tooling and cutting-tool designers specifying tap geometry for machine tooling setups.
Procurement and standards compliance teams in manufacturing specifying taps for parts production.
CNC/machining shops and maintenance departments selecting taps for deep-reach or hard-to-access threading operations.
Suppliers and distributors creating product datasheets and ensuring interchangeability.

Practical benefits:

Ensures interchangeability and consistent dimensions for long shank taps across suppliers.
Aids correct tap selection for deep-threading operations and tooling fixtures.
Simplifies procurement by referencing standardized dimensions and marking.

Related standards

ISO 529: Short machine taps and hand taps (thread lengths referenced)
ISO 8051: Long shank taps M3–M10 - full-diameter shank taps
ISO 8830: Technical specifications and marking for high-speed steel machine taps with ground threads
ISO 237: Diameters of shanks and sizes of driving squares

Keywords: ISO 2283, long shank taps, reduced shank taps, machine taps, ISO metric threads, UNC UNF, tap dimensions, thread tapping standard.

Overview

Key topics and technical requirements

Scope and applicability: Dimensions for reduced-shank long shank machine taps with nominal diameters M3–M24 and 1/8 in–1 in.
Thread types covered: ISO metric (coarse and fine) and ISO inch (UNC, UNF). Non-recommended threads (BSW/BSF/BA) are in Annex A for information only.
Dimensional data: Detailed dimensions provided in figures and tables (metric and inch tables) for nominal diameter, pitch, thread length, shank length (L − l), square size, and related tolerances.
Shank length modification: Shank lengths (L − l) are increased by 50% compared with values in ISO 529 for short taps; total tap lengths are adjusted accordingly.
Thread length: Thread lengths conform to ISO 529.
Marking and technical specifications: Marking requirements and other technical specifications are referenced to ISO 8830 (high-speed steel machine taps with ground threads).
Tolerances: Precision shank tolerance h9 (or h11 for non-precision) and guidance on tolerance enlargement (h12) for square-form errors per ISO 237.

Applications and users

Who uses ISO 2283:

Tool manufacturers producing long shank reduced-shank taps and manufacturers’ quality departments.
Tooling and cutting-tool designers specifying tap geometry for machine tooling setups.
Procurement and standards compliance teams in manufacturing specifying taps for parts production.
CNC/machining shops and maintenance departments selecting taps for deep-reach or hard-to-access threading operations.
Suppliers and distributors creating product datasheets and ensuring interchangeability.

Practical benefits:

Ensures interchangeability and consistent dimensions for long shank taps across suppliers.
Aids correct tap selection for deep-threading operations and tooling fixtures.
Simplifies procurement by referencing standardized dimensions and marking.

Related standards

ISO 529: Short machine taps and hand taps (thread lengths referenced)
ISO 8051: Long shank taps M3–M10 - full-diameter shank taps
ISO 8830: Technical specifications and marking for high-speed steel machine taps with ground threads
ISO 237: Diameters of shanks and sizes of driving squares

Keywords: ISO 2283, long shank taps, reduced shank taps, machine taps, ISO metric threads, UNC UNF, tap dimensions, thread tapping standard.

ISO 2283:2000 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Applications and users

Related standards

Похожие стандарты

Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess

Conveyor belts. Determination of minimum transition distance on three idler rollers

High-speed steel machine taps with ground threads — Technical specifications

Shot blasting machinery - safety and environmental requirements (ISO 23779:2024)

Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in — Amendment 1